 |
||||||||||||
|
||||||||||||
 |
|
Accessories
Home > Products > Accessories IMC offers a complete selection of accessories to meet your specific system requirements. These include: 
Information about Overload Protection including Torq/Gard clutches can be found on the Overload Clutch Page. AC DRIVESAC Drives have never been easierCAMCO IM-pAC AC Drives offer the power of an AC drive with the ease of a DC drive 
Key Features
Easy-to-use AC Drives
|
| Horsepower | AC Input Voltage |
|---|---|
| 1.0 | 120, 240, 460 |
| 1.5 | 120, 240, 460 |
| 2.0 | 240, 460 |
| 3.0 | 240, 460 |
| 5.0 | 460 |
New!
Allen-Bradley AC Drives for your CAMCO indexer
- Preset with indexing parameters
- Thoroughly tested for indexing applications
- 1 HP with 120V, 240V, 480V and 600V AC input voltage
- Download Quick-Start guides
DC Motors & Drives
IMC DC Motors and Drives offer efficient, low-cost cycle-on-demand control for up to 30 cycles per minute. These motors and controls have variable speed capability for control of indexing rates and automated motor cycling for variable dwell periods.
IMC's Varipak DC drive includes:
Digi-Dog
The Digi-Dog is a digitally programmable rotary limit switch based upon resolver technology and EEPROM memory. The Digi-Dog is easily programmed using the operator display. Process times and sequences can be optimized in much less time when compared to other devices. The panel mount allows debugging to occur at a safe distance from the machine.
The Digi-Dog is ideal for applications where several positions require signaling such as Parts Handlers with multiple dwells. Features include:
Camtronics® Rotary Cam Limit Switches
Camtronics rotary cam limit switches have been designed for harsh industrial applications which require accurate and reliable shaft position sensing. They can be used as stand alone switching controls or as a shaft position sensor input to PLCs. The Camtronics uses a photo electric interrupter module to sense the positions . the rotary cams pass through the module and interrupt the circuit without mechanical contact. The method provides long life, high-speed operation and eliminates contact bounce found in mechanical systems.
Features include:
CT-4000 series
CT-6000 series
Reducers
IMC provides a variety of drive systems for indexers. IMC Sales Representative or Applications Engineers will recommend the best drive for your application.
Clutch-Brakes
IMC offers Electric and Air Clutch-Brakes for DC applications where cycle rates exceed 30 cycles per minute. A clutch-brake is mounted between the motor and reducer and allows the motor to maintain its full RPM, eliminating the response time for motor to speed-up. With a compact, integrated design, the clutch-brake can be mounted directly between the motor and gear reducer with NEMA "C" face mounts.
Repairs & Spare Parts
With proper maintenance, IMC products are reliable and long lasting. Occasional replacement of worn parts will keep your system running smoothly and accurately. IMC offers Spare Parts Kits for most products. These kits contain common parts including oil seals, input bearings and shims and can be supplied with additional parts such as cam followers.
IMC can also repair your unit on site or it can be returned to our factory for complete inspection and replacement of worn parts. Service manuals for IMC products and accessories are available for download on this website.
IMC can present seminars at your plant on the proper maintenance or repair of your Camco or Ferguson equipment. In addition, IMC offers a preventive maintenance program. An IMC technician will inspect your equipment on-site and perform routine maintenance from greasing bearings to changing worn cam followers. Contact IMC at 847-459-5200 for more information.
Industrial Motion Control, LLC
1444 South Wolf Road, Wheeling, IL 60090
Toll Free: 1-800-645-5207 Phone: 847-459-5200 FAX: 847-459-3064
camco@destaco.com